How to choose bearings according to the current motor? - Tuoyuan Bearing
Home>News>How to choose bearings according to the current motor?
How to choose bearings according to the current motor?
2024-10-23

One of the most important tasks for motor engineers when designing motors is selecting the right bearings. This involves two main aspects: choosing the bearing configuration and determining the size of the bearings. Engineers often ask questions such as: Can a specific model of motor use two deep groove ball bearings? Should an angular contact ball bearing be used at the front end of a motor?

Can a certain motor use a two-column one-ball structure? In practice, engineers sometimes refer to the bearing configurations of similar motors for their own selection. However, such selections may require adjustments to meet specific requirements.

Starting today, we will introduce some common bearing configurations used in motors. With a general understanding of these configurations, you will have a basic judgment when faced with selection challenges.

Let’s begin with the double deep groove ball bearing configuration. This configuration involves using a deep groove ball bearing at each end of the motor rotor shaft, providing support for the entire shaft system, as shown in the diagram below.

 

 

In motors using a double deep groove ball bearing configuration, both the drive end and non-drive end utilize deep groove ball bearings. In the configuration shown, the drive end (shaft extension end) uses a deep groove ball bearing as a locating bearing. A locating bearing is one where both the inner and outer rings are fixed axially. The details of the locating segment bearing are illustrated in the diagram. The axial fixation of the inner and outer rings is achieved through external components such as the shaft shoulder, the motor’s inner cover, and the end cap, preventing any overall axial displacement of the bearing.

In this motor example, the locating end is set at the shaft extension end, but in practice, it can be adjusted based on specific requirements. Some motors may have the locating end set at the non-drive end (non-shaft extension end). The purpose of the locating end bearing is to fix the shaft axially to the base, ensuring no axial movement occurs between the shaft and the base. This is crucial for the overall integrity of the motor structure.

 

 

The corresponding part to the motor’s locating end bearing is the non-locating end bearing, also known as the floating end. In this case, the non-locating end bearing is positioned at the motor’s non-drive end (also referred to as the non-shaft extension end). Its specific structure is illustrated in the diagram below.

 

 

The non-locating end bearing of the motor does not restrict axial movement, allowing the inner ring to be axially fixed to the shaft while the outer ring remains free within the bearing housing. This design helps to dissipate additional axial loads caused by thermal expansion and other factors. For the double deep groove ball bearing configuration, having one end as a fixed end and the other as a non-fixed end is the simplest and most common setup.

Due to the characteristics of deep groove ball bearings, this configuration can accommodate high-speed applications and is suitable for medium to light loads, making it a popular choice for small and medium motors.

There are additional structural settings to optimize performance:

  1. Preload: Applying axial preload to the bearing system can reduce operational noise. This is achieved by using wave springs or cylindrical springs at the non-fixed end bearing position. Once stabilized, both fixed and non-fixed end bearings bear the corresponding preload, eliminating remaining clearance and reducing noise.

  2. Lubrication Design: For small motors, sealed deep groove ball bearings are often used, which eliminates maintenance concerns. However, if open deep groove ball bearings are selected, a lubrication design is necessary, including seals and lubrication pathways. The key is to ensure that the lubricant enters from one axial side and exits from the other. For horizontal motors, it’s best to position the oil inlet on top and the outlet below.